Rover Li 30 Amp MPPT Solar Charge Controller
Unleash Full Power in Any Environment with Rover Controllers.
Upgrade Your Charging Controller
Upgrade to an MPPT charge controller with low-temperature protection for the most efficient solar charging of your batteries in any environment.
Comprehensive Internal and External Protection
The high-quality casing materials and the addition of a rubber strip make this charge controller more effective in preventing rust, corrosion, and contamination while safeguarding wiring for optimal functionality. Internally, the controller boasts multiple protection mechanisms, ensuring the safety and longevity of your system.
Rapid Heat Dissipation
Rover charge controller stands out with its rapid heat dissipation capabilities, ensuring efficient performance even in the most demanding environments. With the ability to quickly dissipate heat, this controller maintains peak performance, safeguarding your batteries and system components.
Powering Your Adventures Faster
Experience unparalleled charging efficiency with our MPPT charge controller. By harnessing every bit of sunlight, this controller ensures optimal charging for your batteries. In just 3.2 hours, it can fully charge a 12V 100Ah battery, making it the perfect companion for your off-grid adventures.
Revive Your Lithium Batteries from Dead
Featuring a lithium activation function, this charge controller can revive deeply discharged lithium batteries, effectively restoring their performance and extending their lifespan.
Installation Video Guide
Step 1
Step 2
Step 3
Step 4
Connect and set the battery type
The first step needed to set up the charge controller is to connect it to a battery. Then you can directly set the battery type using the arrow keys on the charge controller.
Connection of a Temperature Sensor
Connect the label port on the controller and then place the sensor inside the battery compartment. The sensor can be taped to one side of the battery.
Mounting On a Flat Surface & Bluetooth Connection
The package includes mounting brackets that can be used to mount the Rover on any flat surface. You can purchase an additional BT-2 Module to connect to the Rover using the RS485 port, allowing you to monitor and directly change parameters via the app.
Connect to the Solar Panel
The final step is to connect the solar panel. Use the adapter kit to connect the panel to the Rover. Once connected, the PV voltage will be displayed on the LCD screen.
What's in the box
The Renogy Difference
Going solar is not that complicated. Renogy is here to help you build your system faster so you can roam further.
10+ Years' Expertise in Off-Grid Power Solutions
Local Warehouses in the US
3-Year Warranty
24-Hour Prompt Response
Package Includes
Rover 30 Amp MPPT Solar Charge Controller
x 1
Remote Temperature Sensor (22AWG)
x 1
Mounting Brackets
x 4
Options: BT-2 Bluetooth Module
x 1
Frequently Asked Questions
In what order do I connect my system?
The off-grid solar system includes the solar panels, charge controller, batteries, inverter, Bluetooth module, and wirings. First, the battery should be hooked up to the charge controller with tray cables. Second, then connect your solar panel to your charge controller with adaptor kits.
What type of protection does the Rover MPPT Charge Controller have?
Battery Protection: Battery Over Discharge protection, Battery Over Voltage protection, Battery Reverse Polarity protection, Load Protection: Load Overload protection, Load Short Circuit protection, Controller Overheating protection PV Protection: PV Over Current Protection, PV Short Circuit protection, PV Reverse Polarity protection, Battery overheating protection.
What are the Positive ground and negative ground charge controllers?
In charge controllers, positive ground or negative ground refers to how the controller is wired internally. Positive ground means all the positives are hard-wired together, and the internal switching happens on the negatives. The negative ground is the opposite. It doesn't matter as long as your solar +/- runs to the charge controller and isn't grounded anywhere else.
Does the Rover 30A MPPT charge controller have a built in 30A fuse for the rated 30A load output?
No. Please always add an external fuse between the charge controller and batteries. To determine the fuse size needed between the charge controller and battery bank, you can match the amperage rating on the charge controller. For instance, if you have one of our 30Amp charge controllers, we recommend using a 30Amp fuse.
How many watts can Renogy Rover 30 amp charge controller handle?
The Rover MPPT charge controller can work with standard off-grid 12/24V solar panels with high voltage or multiple panels with voltage up to 100V. And the maximum combined input solar power is 400W for a 12V battery system or 800W for a 24V system. In particular, this controller will significantly increase the efficiency of a solar system where the solar panel voltage is much higher than the battery voltage.
What is a Solar Charge Controller and what is MPPT?
Renogy Rover series solar charge controller uses the most advanced Maximum Power Point Tracking (MPPT) technology to track solar panels' maximum power voltage point as it varies depending on sunlight exposure and temperature. This technology ensures the maximum efficiency of your solar system and significantly outperforms standard PWM solar controllers. Another benefit of MPPT technology is the wide solar input voltage range. This controller can work with standard off-grid 12/24V solar panels and with high voltage or multiple panels with voltage up to 100V.
What are the advantages of Renogy MPPT technology?
Renogy Rover series solar charge controller uses the most advanced Maximum Power Point Tracking (MPPT) technology to track solar panels' maximum power voltage point as it varies depending on sunlight exposure and temperature. This technology ensures the maximum efficiency of your solar system and significantly outperforms standard PWM solar controllers. Another benefit of MPPT technology is the wide solar input voltage range. This controller can work with standard off-grid 12/24V solar panels and with high voltage or multiple panels with voltage up to 100V.
What does 30A on MPPT charge controller mean?
30A represents the max amount of amps the controller can output going INTO THE BATTERIES.
More questions about your off-grid power system? Call us at 1 (909) 287-7111 or submit a ticket for troubleshooting assistance.
