The Renogy 400W 12V Premium Kit is easy for you to install, and it is the most economical choice for the off-grid adventurer. Renogy Solar Kit comes with solar panels, charge controllers, and needed electrical wiring, fuses, and monitoring typically required for an off-grid installation, making it an ideal choice for both off-grid and mobile solar power applications.
The Premium Kit will produce an average of 1.6-2.5kWh of electricity per day (depending on sun availability). The 4 x 100W solar panels don't take up much roof space, but their energy can offset small and medium-size loads such as lighting, television, and coffee maker.
The Premium Kit can build a reliable and environmentally friendly power supply, perfect for all rooftops, RVs, boats, or campers. It can also be installed in a ground mount system as a power supply for outdoor appliances, emergencies, and a stand-alone power system.
![](https://cdn11.bigcommerce.com/s-fhnch/content/RNG-KIT-PREMIUM400D-RVR40/A-03_01.jpg)
By bypassing the shaded cells with poor performance, the bypass diode minimizes the power drop caused by the shadow to ensure excellent performance in low-light environments.
![](https://cdn11.bigcommerce.com/s-fhnch/content/RNG-KIT-PREMIUM400D-RVR40/A-03_02.jpg)
Meant to safeguard your system, the self-diagnostic capability can assess and protect against reverse polarity, battery overcharging, battery over-discharging, overload, short-circuiting, and reverse current.
![](https://cdn11.bigcommerce.com/s-fhnch/content/RNG-KIT-PREMIUM400D-RVR40/A-03_03.jpg)
Automatically detects 12V or 24V DC system voltages, and the LCD screen and multiple LED indicators display the solar charging and battery operation information, customizable parameters, and error codes.
![](https://cdn11.bigcommerce.com/s-fhnch/content/RNG-KIT-PREMIUM400D-RVR40/A-04_01.jpg)
Advanced encapsulation material with multi-layered sheet laminations to protect cells from physical damage or distortion, improving cell performance and providing a long service life. EL tested, no hot-spot heating is guaranteed.
![](https://cdn11.bigcommerce.com/s-fhnch/content/RNG-KIT-PREMIUM400D-RVR40/A-04_02.jpg)
The IP65 Junction Box offers complete protection against environmental particles and low-pressure water jets. These IP67 waterproof solar connectors ensure that the water and dust will not enter the connector during extended outdoor use. Effectively preventing water from seeping in.
![](https://cdn11.bigcommerce.com/s-fhnch/content/RNG-KIT-PREMIUM400D-RVR40/A-04_03.jpg)
Pre-drilled holes on the back frame allow quick installation. The kit has a complete set of accessories and is equipped with an In-line fuse and ANL fuse components to offer more protection.
- To connect the panels in series, you do not need to use the Solar Y Branch Connectors in the kit. The included in-line fuse is intended for use ONLY with a series configuration.
- To connect the panels in parallel, you must use the included Solar Y Branch Connectors, and you will NOT be able to use the included in-line fuse.
- For a parallel configuration, we recommend installing an in-line fuse rated for a current GREATER than the sum of the short circuit current of each panel in parallel in your system.
- If you have any questions regarding this product, please call us at 1 (909) 287-7111 or or submit a ticket for troubleshooting assistance.
- More questions about your off-grid power system? Learn more from Renogy Learning Center!
Package Includes
4 x |
Option 1:Rover Li 40A MPPT Charge Controller 1 x |
Option 2:REGO 12V 60A MPPT Solar Charge Controller 1 x |
1 x |
4 x |
1 x |
10A In-line Fuse and 40A ANL Fuse 1 x |
Solar Y Branch Connectors MMF+FFM Pair 3 x |
Renogy 100W Monocrystalline Solar Panel | |
---|---|
Maximum Power: 100W | Maximum System Voltage: 600V DC (UL) |
Open-Circuit Voltage (Voc): 24.3V | Short-Circuit Current (Isc): 5.21A |
Optimum Operating Voltage (Vmp): 20.4V | Optimum Operating Current (Imp): 4.91A |
Dimensions: 41.8 x 20.9 x1.4 in | Weight: 14.1lbs |
BT-1 Bluetooth Module | Renogy 10A In-line Fuse Holder w/Fuse |
---|---|
Input Voltage: 5V | Rated Current: 10A |
Communication Range: ≤82ft | Rated Voltage: 1000 V DC |
Compatibel Models: All Renogy Controllers with RJ12 port | Contact Material: Copper, Silver Plated |
Operation Temperature: -20℃~85℃(-4°F to 185°F) | Replaceable Fuse: Cylindrical PV Fuse (10x38mm) |
Mounting Z Brackets (Set) | Renogy 8ft 8AWG Tray Cables (A pair) |
---|---|
Eight Long Cap Bolts and Four Short Bolts | Rating Voltage: 600/1000V |
Four Spring Washers and Four Washers | Length: 8ft |
Four Z Shape Solar Panel Brackets | Wire Gauge:8AWG |
Four Nuts | Temperature: -40°F to +185°F |
2ft 8AWG ANL Fuse Cable | ANL 40A Fuse Set |
---|---|
Length and Wire Gauge: 2ft and 8AWG | Current Rating: 40A |
Rating Voltage: AC Uo/U 0.6/1 KV, DC 1.8KV | Voltage Rating: 72V |
Temperature: -40°F to +194°F | Interrupt Capacity: 80A |
Rover Li 40A MPPT Charge Controller | Renogy 20ft 10AWG Solar Adaptor Kit (A pair) |
---|---|
Nominal System Voltage: 12V/24V Auto Recognition | Length: 20ft |
Rated Charge Current: 40A | Wire Gauge: 10AWG |
Max. PV Input Voltage: 100 VDC | Rating Voltage: 600/1000V |
Max. PV Input Power: 12V/520W, 24V/1040W | Temperature: -40°F to +185°F |
Max Battery Voltage: 32V |
Solar Y Branch Connectors | |
---|---|
Withstanding voltage: 1000V DC(TUV), 600V(UL) | Rated Current: 50A |
Protection Degree: IP67, mated | Protection Class: : Class II |
Temperature: -40°F to +194°F |
Warranty Information
Panels |
25-year power output warranty: 5 year 95% output warranty, 10 year 90% output warranty, 25 year 80% output warranty 5-year material and workmanship warranty |
Accessories | 1-year material and workmanship warranty |
1. What do I need to complete my off-grid solar power system ?
A solar panel has to be connected to a charge controller to regulate current, and a battery to store the electrical power. You will need adapter kit cables to wire the solar panel(s) and charge controller, and tray cables connecting the charge controller to a deep-cycle battery.
2. What does off-grid and on-grid mean ?
3. Why is my solar panel under producing ?
4. How should I connect solar panels in my electrical circuit (series vs parallel)?
5. How many solar panels do I need ?
6. Can I add more solar panels to the Rover 40A and expand my system power output?
7. Will this solar kit power my AC unit ?
8. When do I need an inverter ?
![]() |
|||
![]() |
|||
Please click the links below to download the manuals: | |||
BT-1 Bluetooth Module | |||
40A Rover Li Charge Controller | |||
Mounting Z Brackets |